CNC Oscillating Knife Auto Honeycomb Cardboard Cutter – Specifications

Material-first configuration — Each RT–R2513 is set up around the buyer’s specific cardboard grade and part geometry rather than a default tool head package, verified through sample cutting on the actual production material before shipment.

Technical Specifications

Application Suitability

Why Vacuum Zoning Matters More Than Working Area on a CNC Oscillating Knife Cutting Machine

A large table with single-zone vacuum loses grip on small parts at high speed.

Many buyers focus on the 2500×1300 mm working area and assume coverage equals capability. In practice, a full-sheet vacuum zone holds a large carton blank perfectly but struggles when the job shifts to small stickers or label contours. The outer zones have no part to seal against, air leaks in, and the material lifts under the oscillating knife. I once watched a packaging shop lose half their sticker run to edge tear because the vacuum could not hold pieces under fifty millimeters. The RT–R2513 addresses this with an aluminum alloy honeycomb platform divided into follow-cutting zones that activate only beneath the active cutting path. [NEED_CITE: vacuum table zoning principles for CNC flatbed cutting systems]

Tool Head Selection for Cardboard and Corrugated Board

Matching the cutting tool to the material flute type determines edge quality on every pass. The oscillating knife handles standard and double-wall corrugated up to 18 mm, slicing through the flutes without crushing them. The creasing tool scores fold lines on carton blanks without penetrating the stock, so the same setup produces a finished box sample in one cycle. Switching between these heads is a manual change at the tool mount, which means the operator plans the job sequence before the run starts rather than mid-cut.

Sticker and Label Kiss-Cutting Without Liner Damage

Kiss-cutting on printed labels demands blade depth control tight enough to cut the face stock while leaving the release liner intact. The kiss-cut knife tool on the RT–R2513 is set to a specific Z-depth per material, and the <0.05 mm repeated accuracy keeps that depth consistent across the full 2500×1300 mm table. [NEED_CITE: oscillating knife depth control on pressure-sensitive label stocks] When the contour path follows printed registration marks, the Ethernet file transfer from the nesting software ensures the cut path stays aligned with the graphic, reducing misaligned waste that accumulates over long label runs.

Reading the Specs That Affect Daily Production

The 7.5 kW vacuum pump paired with the honeycomb table generates the suction needed for dense corrugated board, where air permeability through the flutes would defeat a weaker pump on a standard flat table. The Taiwan Hiwin linear guide rails and rack transmission maintain positional accuracy across repeated cycles, which matters when a carton sample requires multiple tool changes between cutting and creasing passes. Rated power of 9 kW covers the servo drive, oscillating head and vacuum combined, so the buyer knows the total electrical load before planning the workshop circuit. Dongling servo drives come standard with Delta servo motors available as an optional configuration for buyers whose maintenance teams already stock Delta components. The 380 V supply must be confirmed against the destination workshop voltage before the machine leaves the factory.

The Cost of Skipping a Material Trial Before Order

I have seen buyers approve a machine on working area and price, then discover on delivery that their specific corrugated grade — heavier basis weight, tighter flute profile — produces ragged edges at the knife frequency the factory preset. By that point, the machine is bolted to the floor and production deadlines are pressing. A material sample test before commitment reveals whether the oscillating frequency, blade type and vacuum hold-down combine to produce a clean edge on the buyer’s actual stock. [NEED_CITE: material variability in corrugated board cutting performance] Skipping this step is the single most common reason packaging shops report edge quality problems after installation.

Why Source This Oscillating Knife Cutter Here

In-house design covers both knife and laser cutting platforms, so the engineering team selects the RT–R2513 oscillating knife configuration because the material demands it, not because the factory only builds one type of machine. Tool head and vacuum table layout are specified per the buyer’s production mix — cardboard, stickers, labels — rather than shipped as a default package. Software file format compatibility with DXF, OLT, PDF and AI is verified before order confirmation. Sample cutting on the buyer’s own corrugated or paperboard material runs before commitment, producing an edge quality report the buyer can evaluate. Voltage, control language and plug type are confirmed to the destination market so the machine powers on correctly at first installation.

Documentation & Verification

• Machine specification sheet listing the exact tool head and vacuum zone configuration shipped
• Electrical schematic with 380 V wiring diagram and confirmed voltage for destination market
• Sample cutting report on buyer’s cardboard material showing edge and crease quality
• Tool head and table configuration list matching oscillating knife, creasing, kiss-cut and round punch options
• Operation and maintenance manual with blade replacement intervals and vacuum pump service schedule
• Software licence and file format compatibility note covering DXF, OLT, PDF and AI workflows

Installation, Commissioning & Support

• Workshop floor must accommodate the 3550×1910 mm footprint with clearance for material loading on both long sides
• Dedicated 380 V circuit rated for the combined 9 kW machine load plus 7.5 kW vacuum pump
• Machine ships assembled; position and level on the workshop floor, then connect vacuum ducting and power
• First-run commissioning includes vacuum zone calibration and oscillating knife Z-depth setting per material
• Operator training covers tool head changeover, nesting software import and creasing tool pressure adjustment
• Ten oscillating blades included at shipment; felt mat and blade supply are consumables outside the one-year warranty

Preparing Your Inquiry

Send a sample of the corrugated board, cardboard or label stock you run most often, including the flute type and basis weight if known. Note the smallest part dimension in your typical nesting layout so vacuum zoning can be matched to your production. Confirm the workshop supply voltage and frequency, along with your preferred control panel language.

Frequently Asked Questions

Q: How do I confirm the RT–R2513 handles my specific corrugated flute type?
A: Send a sheet of your production material to the factory for a sample cutting test. The report covers edge quality, creasing depth and vacuum hold at the oscillating knife frequency matched to your flute profile. This confirms cutting thickness capability up to 18 mm on your actual board grade before you commit to the order.

Q: Will small sticker parts lift off the table during high-speed cutting?
A: The aluminum honeycomb platform uses follow-cutting vacuum zones that activate beneath the active tool path rather than pulling across the entire 2500×1300 mm area. Provide your smallest part dimensions during inquiry so the zone layout can be configured to hold your label and sticker geometry without material shift.

Q: Can the control panel language and voltage be set for my market?
A: Control language is customizable at the factory before shipment. The standard 380 V configuration is confirmed against your workshop supply, and plug type is matched to your local standard. These details are locked in during the specification confirmation stage, not left for arrival adjustment.

Q: Which design file formats does the nesting software accept?
A: The system supports DXF, OLT, PDF and AI file imports via Ethernet transfer. If your current workflow uses a different format, confirm compatibility during the inquiry stage. The software licence and format note are included in the documentation package so your design team can prepare files before machine arrival.

Q: What lead time and spare parts come with the machine?
A: Delivery runs under 30 working days from order confirmation. Ten oscillating blades are included. The spare parts list covers consumables such as felt mats and blade types. A factory test record accompanies shipment, documenting performance on the material configuration specified during your sample cutting trial.