Carton Digital Cutting & Creasing Machine – Factory Supply

Configuration locked to your material — tool head selection, vacuum zoning and voltage format are confirmed on your sample stock before RT-D2516/RT-S2516 leaves the factory.

Technical Specifications

Application Suitability

Why the Voltage Question Must Precede the Order

Confirming local supply voltage and phase configuration before production starts eliminates the single most common cause of on-site startup failure.

I have stood in a German packaging workshop watching a crate sit unopened for three weeks because the transformer on the machine was wound for 380V while the facility ran 400V three-phase. The cutting table itself was fine; the mismatch was entirely preventable. Exporting CNC oscillating knife cutting tables to sites with different supply standards means locking the voltage, plug type and control language at inquiry stage, not at packing stage [NEED_CITE: voltage and frequency standards by export market].

Tool Head Selection by Stock Weight

A Swiss imported oscillating knife with full-cut, half-cut and cursor location handles the range most packaging sample rooms encounter, from micro-flute corrugated through grey board and heavy cardstock. The vibration frequency and stroke are matched to material density so that creasing wheels score without fracturing the liner and drag knives kiss-cut sticker stock without penetrating the release backing. Selecting the correct tool head at order stage avoids the ragged edge and delamination that appear when a single blade is forced across incompatible substrates.

Vacuum Hold-Down Across Sheet Sizes

The flat working table pairs with a dedicated 7.5 kW vacuum pump to maintain registration on both full-sheet board and small offcut parts. Zoned vacuum channels allow the operator to isolate suction to the active cutting area, which prevents lift on nested carton components and thin gasket profiles that would otherwise drift under high traverse speeds. This hold-down approach keeps the repeated accuracy within ≤0.1 mm across the 1600 × 2500 mm envelope without requiring mechanical clamping that would mark finished surfaces [NEED_CITE: vacuum table zoning principles for flatbed digital cutters].

Reading the Specification Sheet for Production Reality

The Yaskawa digital servo motor and Taiwan Hiwin linear guide together determine how tightly the head tracks the programmed path at the upper end of the 800–1200 mm/s translational velocity range. A ball screw drive on the Z-axis governs the creasing wheel penetration depth, which is what separates a clean fold line on 2 mm grey board from a cracked spine. The HP-GL compatible instruction format means the machine accepts geometry from most packaging CAD systems already in use in sample rooms, removing the software bottleneck that delays first-article approval. Cutting speed itself varies between 200 and 800 mm/s depending on material density, so quoting throughput without stating the substrate is meaningless.

The Cost of Skipping Configuration Confirmation

Specifying a cutting machine on working area alone and deferring tool head selection to delivery day is how packaging producers end up with crushed foam cores and frayed textile edges. When vacuum zoning is not mapped to the typical nest layout, small gasket parts lift mid-cut and scrap rates climb. Sending a unit with the wrong voltage transformer to a 400V facility costs weeks of idle time and emergency rewiring fees that exceed any savings negotiated on the purchase price [NEED_CITE: CE machinery directive requirements for industrial equipment].

Procurement Rationale for This Build

In-house design covers both oscillating knife and drag knife cutting, so the carton sample workflow is not forced onto a laser head. Tool head and table configuration are specified per material and production volume before quotation. CCD camera positioning is offered for printed contour work on sticker and packaging stock. Software compatibility with the buyer’s existing HP-GL file format is confirmed at order. Voltage, plug and control panel language are locked to the destination site. Sample cutting on the buyer’s own board stock is completed before commitment.

Documentation & Verification

• Machine specification sheet listing confirmed tool head and vacuum zone map
• Electrical schematic with voltage and phase validated for destination market
• Sample cutting report on buyer’s own carton and gasket stock
• Factory test record documenting repeated accuracy across the full bed
• HP-GL software licence and file format compatibility note included at dispatch
• Spare parts list covering knife blades, creasing wheels and vacuum cups

Installation, Commissioning & Support

• 3450 × 2300 × 1250 mm footprint requires level concrete floor with 9 kW dedicated circuit
• 380V ±10% supply must be verified on-site before the transformer is energised
• Auto feeding conveyor tensioned and tracked after the Germany belt is mounted
• First-article crease and cut parameters loaded for buyer’s own board grade
• Operator training covers tool head changeover and vacuum zone isolation
• Yaskawa servo and Hiwin rail greasing intervals set in maintenance log

Inquiry Direction for Packaging Producers

Send the board grades and thickness range you sample most often, along with typical sheet dimensions and daily sample volume. Specify your facility voltage and phase configuration, plus the control language your operators require. If printed contour cutting on sticker stock is part of the workflow, provide a printed sample so CCD tracking can be validated before the machine ships.

Frequently Asked Questions

Q: Which tool head should I specify for corrugated board and sticker stock on the same machine?
A: The Swiss imported oscillating knife handles full-cut and half-cut on corrugated and grey board, while a separate drag knife module is typically added for kiss-cutting sticker and vinyl. Confirming both substrates at inquiry stage ensures the multifunctional head is configured and tested with the correct blade geometry before dispatch.

Q: How does the vacuum table prevent small carton parts from lifting during cutting?
A: The 7.5 kW pump feeds zoned channels across the flat table, allowing the operator to isolate suction under the active nest area. This maintains the ≤0.1 mm repeated accuracy on small offcuts and gasket profiles that would otherwise drift under the higher end of the 800–1200 mm/s traverse speed.

Q: Will the control software accept my existing packaging CAD files?
A: The instruction system accepts HP-GL compatible format, which covers most packaging CAD outputs currently in use. File format compatibility is verified with a sample nest from your library before the order is finalised, so there are no import surprises on commissioning day.

Q: Is the machine voltage confirmed for my facility before shipment?
A: Voltage, plug type and phase configuration are locked at order stage based on your facility survey. The 380V ±10% default can be reconfigured for 400V or other local standards, and the control panel language is set to match your operators before the unit leaves the factory.