1625 Mini CCD Flatbed Cutting Plotter – Manufacturer

Configured per material — we cut and crease your actual corrugated or foam stock on the 1625 before finalizing the tool head and vacuum zoning, so the configuration matches the job rather than the brochure.

Technical Specifications

Application Suitability

What "Cutting Thickness ≤ 40 mm" Actually Means on the Shop Floor

Thickness ratings are meaningless without specifying the tool head and material density used during the test.

When a packaging producer sees a CNC oscillating knife cutting machine specifications sheet listing a blanket cutting depth, they often assume it applies uniformly across every substrate they run. In reality, 40 mm of low-density EPE foam behaves completely differently from 40 mm of BC-flute corrugated board or dense rubber matting. I once watched a sample run where a standard drag knife was specified for a greyboard prototype; the edge crushed and the crease line split on folding because the oscillating frequency and blade geometry were wrong for that density [NEED_CITE: material density impact on oscillating knife cutting performance]. Matching the knife type to the material avoids scrap and re-cutting on the first day of production.

Tool Head Selection Dictates Edge Quality Across Packaging Substrates

The 1625 carries up to seven tool head options on a single carriage, which matters when a sample room runs corrugated prot*noon. The oscillating knife handles dense flutes without crushing the edges, while the creasing wheel scores fold lines without cutting through the face paper. For short-run carton work, combining the V groove knife and kiss cutting tool in one pass eliminates secondary routing, keeping CNC oscillating knife cutting machine specifications aligned with what the operator actually needs at the table.

Vacuum Hold-Down Capacity for Small and Irregular Parts

Small packaging components — think insert dividers, corner protectors, and latch tabs — tend to lift off the bed when the knife exits a cut at high speed. The aluminum bellows vacuum table paired with a 9 kW pump provides full-surface adsorption across the 1600 × 2500 mm area, which keeps thin art paper and lightweight cardstock flat during rapid directional changes. Zoning the vacuum into sections means an operator can hold a small nest of parts in one zone while loading the next sheet in another, reducing dead time between jobs [NEED_CITE: vacuum table zoning principles for flatbed digital cutters].

Reading the Numbers That Matter for Packaging Die-Line Work

The ±0.1 mm cutting accuracy is driven by the servo motor selection — Panasonic, Delta, or Dorna options are available depending on the buyer’s tolerance requirements and service network in their region. For packaging sample makers, this tolerance means registration marks on printed carton faces stay aligned with the cut path, so fold lines hit the scored crease exactly. The 0 – 1500 mm/s cutting speed range gives operators room to slow down on intricate corner geometries in thick BC-flute while running straight cuts on simple box blanks at full pace. File format support for PLT, DXF, AI, and PDF removes the conversion step that often introduces curve approximation errors when moving from a designer’s CAD environment to the machine controller. The dedicated packaging box structure design software handles parametric box templates directly, so a sample maker can adjust a folding carton dimension and regenerate the tool path without leaving the software.

The Hidden Cost of Skipping a Material-Specific Sample Test

Specifying a flatbed cutter on working area alone, without running the buyer’s actual stock, leads to problems that surface only after installation. A knife that slices cleanly through 3 mm E-flute may leave ragged fibers on 5 mm greyboard, forcing the operator to reduce speed and make multiple passes. Foam inserts cut with the wrong blade angle produce compressed edges that spring back and leave gaps in the assembled package [NEED_CITE: tooling mismatch consequences in digital packaging production]. These issues are avoidable if a sample cutting report on the exact material is reviewed before the order is confirmed.

Why Packaging Producers Source This Configuration Here

In-house design covers both knife cutting and table engineering, so the tool head carriage and vacuum zoning are matched to packaging workflows rather than adapted from a generic sign-making platform. Every 1625 leaves the factory with a tool head and table configuration list built around the buyer’s stated material and thickness, not a default build. Sample cutting on the buyer’s own corrugated, foam, or cardstock is completed before shipment, providing a physical reference for edge quality and crease depth. Voltage and control panel language are confirmed against the destination market’s electrical standards before production begins, avoiding rewiring or interface confusion on arrival [NEED_CITE: industrial equipment voltage and language confirmation practices]. Software license and file format compatibility are documented so the buyer’s existing CAD files open without conversion friction.

Documentation & Verification

• Machine specification sheet detailing the selected tool heads and vacuum configuration for your material range
• Electrical schematic and voltage confirmation document matching your facility’s 110V, 220V, or 380V supply
• Sample cutting report on your corrugated or foam stock showing edge quality and crease depth at working speed
• Software license and file format compatibility note covering PLT, DXF, AI, and PDF import verification
• Operation and maintenance manual in the confirmed control panel language with tool change procedures
• Spare parts list matched to your selected knife and creasing tool consumables

Installation, Commissioning & Support

• Floor space of at least 3400 × 2800 mm required for the 1625 with clearance for sheet loading on the 1600 × 2500 mm bed
• Dedicated electrical circuit matching confirmed 110V, 220V, or 380V supply with appropriate breaker rating for the 9 kW vacuum pump
• Machine arrives assembled; vacuum table leveling and belt tension checked during commissioning
• First-run parameter setting covers knife oscillation frequency, vacuum zoning, and servo tuning for your primary material
• Operator training covers tool head changes between oscillating knife, creasing wheel, and kiss cutting tool
• Routine maintenance schedule for aluminum bellows vacuum table filter cleaning and servo motor inspection

What to Share When Requesting a Quotation

Send the material type, flute profile or foam density, maximum sheet thickness, and the daily volume of samples or short-run parts you expect to produce. Include your facility’s voltage and frequency, the control panel language your operators need, and whether your design team works in PLT, DXF, AI, or PDF. If you can ship a few sheets of your actual stock, a sample cutting run will confirm the tool head and vacuum setup before the machine enters production.

Frequently Asked Questions

Q: How do I confirm the machine handles my material thickness across different substrates?
A: The ≤ 40 mm rating applies under specific tool and material conditions. Request a sample cutting report using your own corrugated, foam, or rubber stock. The report documents which knife type, oscillation frequency, and cutting speed produced a clean edge, giving you a verified baseline rather than a generic depth claim.

Q: Which tool head is right for my packaging material?
A: Oscillating knives suit dense corrugated and greyboard; creasing wheels score fold lines without through-cutting; kiss cutting tools handle adhesive-backed labels and thin face papers. The correct choice depends on your substrate and whether you need cut-and-crease in one pass. Share a material sample so the configuration can be tested.

Q: How is the vacuum table set up for small packaging parts that lift during cutting?
A: The aluminum bellows table with the 9 kW pump allows zoning, so suction concentrates under the area where small parts are nested. This prevents lightweight cardstock and foam tabs from shifting when the knife exits at speed, maintaining the ±0.1 mm accuracy across the full sheet.

Q: Can the software import my existing packaging CAD files?
A: The included software supports PLT, DXF, AI, and PDF import. Before order confirmation, a file format compatibility note is issued documenting which formats have been tested with your specific design files, eliminating conversion errors that distort curves and registration marks.

Q: What voltage and language are confirmed before shipment?
A: The control panel supports English, Russian, Italian, Chinese, and customizable languages. Voltage is configurable at 110V, 220V, or 380V. An electrical schematic and voltage confirmation document matching your local supply standard is provided before production starts, so no rewiring is needed on arrival.